In case of unreasonable touchpoints, users can calibrate the touch panel of the Xpanel device. Calibration can be started on the device itself.

Calibration via Xpanel Settings

1. To open the Runtime Settings while an Xpanel project is running, do the three-corner method (tap the bottom left, bottom right, and top-right corners of the screen):

   Image Added

    

2. Tap Exit to get redirected to the Control Center page > tap Settings.

   Image Added

    

3. Tap Touch Calibration > Start Calibrate.

   Image Added

    

4. Follow the prompts on the Xpanel screen to calibrate the touch screen.

   Image Added

   For reference, the order of calibration touchpoints is displayed below:

   Image Added

Calibration Without Xpanel Settings

1. If unable to open the Xpanel Settings, place 3 fingers on the screen and hold for 3 seconds.

2. The calibration screen should resemble the below image when opened. Follow the prompts on the Xpanel screen to calibrate the touch screen.

   Image Added