To use the Xpanel Canvas Data Server feature, you must configure the associated SCADA project as well.
...
CIMON-SCADA
...
Configuration
Step 1
In CimonD,
...
click Tools > I/O Device
...
.
...
Click New Device
...
to bring up the
...
I/O Device Selection
...
window as shown below. Select
...
CIMON-XPANEL
...
Ethernet from the list and assign a Device Name for selected devices.
...
Click Add Station > IP Addr.
...
> enter the target device’s IP address.
You may also choose the
...
Scan Time, Time Out, and
...
Description for the device. However, this is optional.
...
Item | Description | |
Station Name | Enter a name for the station. Special characters are not allowed. | |
Station Type | Select the device type of the target station. Different options will be available depending on which protocol you selected in the [I/O Device Selection] window. | |
Station No. | Assign a station number if required by the protocol. | |
IP Addr. | Assign the IP address of the device. | |
#1-1 IP Address | Specify the main IP address for the device. | |
#1-2 IP Address | Specify a secondary IP address for the device. This field is optional. | |
#2-1 IP Address | Specify a primary backup IP address for the device. This field is optional. | |
#2-2 IP Address | Specify a secondary backup IP address for the device. This field is optional. | |
Scan Time | Specify the frequency with which SCADA will update tag values from the HMI. | |
Time Out | Specify the length of time which SCADA will treat as a broken communication. | |
Description | Enter a description of the station. | |
...
Step 2
Click Add COM Block
...
to assign a data block for the communication. If you do not add a COM block for each desired memory block (D for Data, S for String), SCADA will be unable to read the requested data from the HMI.
...
Item | Description |
Block No | Assign a number to identify the COM block. |
Address | Choose the starting address for the COM block. Choose ‘D' for data memory or 'S’ for string memory. This address corresponds to the addresses 0-4999 specified in the [Data Server] window in XpanelDesigner. |
Word | Choose the number of words to read from the HMI. If you wish to read more than 128 words from the HMI, you must create additional COM blocks. For example, if the starting address is D1000 and the 'Word' setting is 128, you will be able to access addresses D1000-D1127. |
Scan | Set the frequency with which SCADA will read/write data from the HMI. This value cannot be less than the value chosen in the [Station] configuration window. |
...
Step 3
Click COM Port
...
tab and enter the local PC’s IP address. For most users,
...
“0.0.0.
...
0” will show by default.
...
...
Register a real tag whose address lies within the COM block data range.
...
...
To check that the tag value is being read, you can create a dynamic tag by
...
clicking Draw > Tag Value(S)
...
> click on the graphic page
...
and assign the
...
tag
...
created
...
.
...
.gif?version=1&modificationDate=1670538552662&cacheVersion=1&api=v2)
...
Execute CimonX to check the operation by clicking Tools > Run Project. If the connection is successful, the tag value (0 by default) will be displayed. If the connection is unsuccessful, question marks “???“ will be displayed instead.