Versions Compared

Version Old Version 9 New Version 10
Changes made by

Narin Maneekhat (Unlicensed)

Narin Maneekhat (Unlicensed)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Allows users to directly download a project to the Xpanel from CIMON Canvas via mini USB or Ethernet. Both methods are described below.

Downloading/Uploading over USB

...

Downloading/Uploading over Ethernet

Check IP address of the PC

...

 


  • The Subnet Mask and Gateway fields should be configured to match those of the PC. These can be found using the “ipconfig” command.

  • Duplicate IP addresses are not allowed. Make sure the IP address you choose is not being used by another device on the network.

  • The Xpanel IP address must be on the same local network as the PC. If the subnet mask is set to 255.255.255.0, this means the first 3 values of the IP address must match those of the default gateway. If the subnet mask is set to 255.255.0.0, then the first 2 values must match, and so on.

Settings for CIMON Canvas

  1. Run CIMON Canvas and open a project to be downloaded, or proceed to the next step if you are uploading to the PC.

  2. Click Tools > Deployment Panel and choose which Xpanel you will be using by checking the box on the left-hand side. If the Status of the Xpanel is OFFLINE, the user will not be able to download/upload a project.

  3. The user will receive a warning message confirming they will install the currently loaded project on CIMON Canvas to the selected Xpanel. If the user is certain, click Ok.

...