Content Comparison

Item

Description

Project Name

Enter the name of the project. The project name will be saved as ‘Sample Project Name’. A duplicate name is not allowed and thus will overwrite the same-named project.
The name can be changed in the “Property Editor” after clicking on the project name in the “Project Browser.”
※ Refer to the [Copy Project] section for more information.

Save Location

Specify the path where the project will be saved. The default path is “C:\Users\User\”. A folder with the project name will be created, and the project file is saved as a “.cnvs” format in the folder.

 

Screen Size

The type of project file can be decided according to the dimension of each Xpanel model.
You can choose a model from the table below.

4” Xpanel

7” Xpanel

10–12” Xpanel

15” Xpanel

10” IPC

11–15” IPC

19” IPC

1366 x 768 (PC)

1440 x 900 (PC)

1920 x 1080 (PC)

3840 x 2160 (PC)

Custom

W

Allows the user to determine their own custom project-page pixel width. A default selection will be made when selecting any screen size besides custom.

L

Allows the user to determine their own custom project-page pixel length. A default selection will be made when selecting any screen size besides custom.

 Password

Password

Checkbox

Sets up the password for the project. The password must be entered with the following criteria.

1. You can use alphanumeric. The password is case sensitive.

2. You cannot use special characters and spaces.

3. You can enter the password up to 8 characters.

4. The password is displayed as ‘****’.

Password

Enter the same password to confirm.

Confirm Password

Saves the password setting.

The password you selected cannot be retrieved if forgotten.

OK

Creates a project with the entered information.

Cancel

Does not create a project and goes back to the start-up screen.