This driver allows for communication with CIMON devices (PLCs, XPanels, IPCs) using a standard Ethernet connection.
...
CIMON-PLC Ethernet 드라이버는 CIMON 장비 (PLC, Xpanel, IPC 등) 간의 Ethernet 통신을 지원합니다.
통신 설정: Xpanel
Comm. Module
I/O Device Configuration | To create a new device, select [Tools] → 디바이스 설정 | 새 디바이스를 추가하려면 [도구] - [I/O Device Editor]. Click the icon to add a new device, then select an “Ethernet” [Connection Type] and a “CIMON CI-net (CIMON-PLC)” [Device Type]. Device Name: Designate a name for the I/O Device디바이스 편집기]로 진입하여 아이콘을 클릭한 뒤, 통신 종류는 “Ethernet”, 디바이스 종류는 “CIMON-PLC Ethernet”을 선택합니다. 디바이스 이름: 등록하고자 하는 I/O 디바이스의 이름을 지정합니다. |
I/O Device Settings디바이스 설정
| Once the connection type, device name, and device type have been assigned, the 통신 종류, 디바이스 이름 및 디바이스 종류 지정이 완료되면 [I/O Device Editor] window populates with the default settings for the selected communication protocol. After selecting the correct [Connection Type] and [Device Type], match the remaining settings to the target I/O device’s communication settings. |
Communication Settings: PLC
디바이스 편집기] 화면 우측에 선택된 통신 드라이버 설정 화면이 기본 값과 함께 표시됩니다. 통신 대상 장비의 정보에 맞게 설정을 완료하시기 바랍니다. |
통신 설정: PLC
통신 모듈 | 다음 목록 중 현재 사용중인 PLC 모듈이 있다면 CICON에서 반드시 모듈 설정을 진행해야 합니다.
All communication parameters must match the settings chosen during the I/O device configuration in Canvas. Once the correct parameters have been entered, press the [Write] button while online with the PLC to update the communication parameters. |
CPU built-in Comm. port | If using a built-in CPU (PLC) ethernet port to communicate with Xpanel, the channel settings must be configured in CICON as shown below: This connection option is available with the following models:
|
...