Page Comparison

Comm. Module

If using one of the following PLC modules to communicate with Xpanel, the card settings must be configured in CICON as shown below:

• CM1 - EC01A

• CM1 - EC10A

• CM1 - EC10B

• CM3 - SP01EET

• BPnnMxxx - U

  Image RemovedImage Added

All communication parameters must match the settings chosen during the I/O device configuration in Canvas. Once the correct parameters have been entered, press the [Write] button while online with the PLC to update the communication parameters.

CPU built-in Comm. port

If using a built-in CPU (PLC) ethernet port to communicate with Xpanel, the channel settings must be configured in CICON as shown below:

This connection option is available with the following models:

• CM1 - XP1F

• BPnnMxxx - S

• PLC-S

  

  All communication parameters must match the settings chosen during the I/O device configuration in Canvas.