...
If the Settings dialog box is not already open, then touch the corners of the Xpanel screen in the sequence shown below: bottom-left -> bottom-right -> top-right. The Settings window will appear.
Select [Exit]. This will stop the Xpanel runtime and take you to the [CONTROL CENTER] window.
Navigate to the VNC by clicking [Settings] > [IP Config]. Set the user’s IP address(es) for the Xpanel device in either LAN 1 and/or LAN 2. After the user’s IP information is set, scroll to the bottom and click [Apply and Save]. If the subnet mask and/or gateway are different from those of the PC, then change them to match the PC.VNC Server Setup].
You can start the remote-control server by pressing the [Start VNC Server] button. If the ‘Autorun On Startup’ option has been selected, the server starts automatically when the Xpanel is turned on. You may stop the remote-control server by pressing the [Stop VNC Server] button.
...