XT04 / XT07 / XT08
The same port is used for COM1 / COM21개의 포트를 통해 COM1과 COM2 설정을 할 수 있습니다..
RS-232C COM1
Connector | Pin No. | Name | Description |
| 1 |
|
|
2 | RD | Receive Data | |
3 | TD | Transmit Data | |
4 |
|
| |
5 | SG | Signal Ground | |
6 |
|
| |
7 |
|
| |
8 |
|
| |
9 |
|
|
...
Connector | Pin No. | Name | Description |
  | 1 | SDA | Send Data A |
2 |
|
| |
3 |
|
| |
4 | RDA | Receive Data A | |
5 | SG |
| |
6 | SDB | Send Data B | |
7 |
|
| |
8 |
|
| |
9 | RDB | Receive Data B |
※ The Xpanel Hybrid (7") uses only the COM1 port for communication (COM2 is used internally to communicate with PLCs). COM1 supports all three types of serial communication 제품은 COM1만 사용합니다. (COM2는 내부적으로 PLC와 통신하기 위해 사용됩니다.) COM1 이 Serial 통신 3종류를 모두 지원합니다. (RS-232/422/485).
XT10 / XT12 / XT15
RS-232C COM2
Connector | Pin No | Name | Description |
  | 1 | DCD | Data Carrier Detect |
2 | RD | Receive Data | |
3 | TD | Transmit Data | |
4 | DTR | Data Terminal Ready | |
5 | SG | Signal Ground | |
6 | DSR | Data Set Ready | |
7 | RTS | Request To Send | |
8 | CTS | Clear To Send | |
9 | RI | Ring Indicator |
...
Connector | Pin No | Name | Description |
  | 1 | RDB | Receive Data B |
2 | RDA | Receive Data A | |
3 | GND | Ground | |
4 | SDB | Send Data B | |
5 | SDA | Send Data A |
...