Page Comparison

Create a new device

To create a new device, select [Tools] → [I/O Devices] or click the icon in the main toolbar. The following picture shows the first step in creating a new device.

I/O Device Name: Give a device name. This name will be used in the tag database, accompanied by the ‘Station Name’.

Select a device type

After selecting the [OK] button in the previous step, the ‘Ethernet Communication Configuration’ dialog box will appear as shown in the following picture:

In this window, set the ‘Device Type’ to ‘MITSUBISHI MELSEC 1E’ and configure the remaining Ethernet communication parameters. See the Communication Configuration section for more information.

Create a station

Move to the [Station] tab of the ‘Ethernet Communication Configuration’ dialog box. In this dialog box, connected PLC stations can be configured and registered to the Xpanel.

Each field can be configured with the following rules:

Station Name: Give a name to the PLC. This name will be used in the tag database, accompanied by the ‘Device Name’

Station Type: Choose ‘MELSEC’ (this is the only available option).

Network ID: N/A

IP Address: Give the IP address of the PLC in dotted decimal format (e.g. “1.2.3.4“).

Socket Port Number: Give the port number used by the PLC. The default value of this field is 5000.

See the Communication Configuration section for more information about the remaining parameters.

Connect through an Ethernet HUB

Direct connection