...
Item | Description | |
Watchdog Timer | The Watchdog Timer is a function that automatically resets the hardware when project data has failed to operate. You can assign the timer from 10 to 65535 seconds for watchdog operation. This function operates properly in Xpanel versions 2.09 and above. | |
Hold time for Touch Calibration | If the touchpoints are severely unreasonable and there is an inability to use a mouse, you can press and hold a random point of the screen to start touch calibration. You can assign the holding time from 30 to 32676 seconds. | |
It beeps while touching screen. | A beep sound continuously plays while touching the Xpanel screen. | |
VNC Option | This option is for using a remote control server. ※ Please refer to the VNC manual for more information. | |
VNC activates as Ethernet loader starts | The remote control server starts automatically when the checkbox has been selected. | |
Run VNC Server | Starts the remote control server. | |
Stop VNC Server | Terminates the remote control server. | |
REPAIR Mode | When an error occurs during downloading the project to Xpanel, you can fix the error through Repair Mode. ※ Please refer to the Xpanel Repair Mode manual for more information. | |
Save and Quit | Saves the settings in the ‘Configure’ dialog box and goes back to the ‘Ethernet Loader’ window. | |
Quit | Closes the ‘Configure’ dialog box without saving the settings. | |
...