...
Item | Description |
Addr | Controls the object with the address registered in the [I/O Device]. You can select the data unit (BIT/WORD). Press |
Tag | You must enter the tag name that will become the standard for the ‘Rotate’ feature. You can find the tag with If the corresponding tag does not exist in the database, a message pops up asking the user if they wish to add a new tag. |
Data Range | Assign the range of the object’s rotation by minimum and maximum values. When the tag value is equal to or less than the minimum value, the object does not rotate. When the tag value becomes greater, the object rotates. If you enter ‘?’, the minimum and the maximum values are the same as the tag’s values. |
to configure the detailed address.[Rotate]
...
Item | Description | |
Max Rotate Angle | You can assign a maximum rotation angle. A value from 0 to 360 can be assigned. | |
Rotate Direction | CCW | The object rotates counterclockwise. |
CW | The object rotates clockwise. | |
Center Point | Assign the center point’s coordinate of the rotation. The absolute coordinate must be assigned in pixel units. It is recommended to assign the coordinates within the range of the graphic page. | |
...
[Security]: This feature is to put a limit on users when using the object.
※ ※ Please refer to the ‘Security’ manual for more information.
...
This feature is to put a limit on users when using the object. You can assign a security level between 0 and 10.
...
※ ※ Please refer to the ‘Security’ manual for more information.
[Expression]
...
Item | Description |
X Offset (pixels) | Assign a coordinate of the X-axis for the data entry window. You can assign values between -32768 and 32767. If the coordinate exceeds the graphic page, the window appears on the nearest border. |
Y Offset (pixels) | Assign a coordinate of the Y-axis for the data entry window. You can assign values between -32768 and 32767. If the coordinate exceeds the graphic page, the window appears on the nearest border. |
Digit Number | You can enter the value with a specified number of digits. The set value can be assigned from 0 to 255. If the ‘Decimal point’ option has been selected, the digit number must bigger than the number of decimals. |
Decimal Point | The entry value is displayed with a specified number of decimals. |
Hexa-Decimal | Enter the value with a hexadecimal number. |
※ ※ ‘Digit number’, ‘Decimal point’, and ‘Hexa-decimal’ options are supported in XpanelDesigner 2.53 and above versions.
...