Page Comparison

Item

Description

Alarm Group

Select an alarm group to display on the object.

Display Color

Configures the color of items displayed on the object. You can configure the colors of the object’s background: Occur, Acknowledgement, and Release. You can also distinguish the alarm levels by color. Press the [BatchEdit] button to configure the colors for each alarm level.

Image Removed

Image Added

Image Removed

Image Added

Alarm Status

Select the type of alarm statuses to display on the object. You can select ‘Occur’, ‘Acked’, ‘Release’, and ‘Display Active Alarm Only’.

If you select the ‘Display Active Alarm Only’ option, the other options are disabled. The object will only display the alarms that are currently On. If the alarms are released, the message will be deleted automatically from the object.

Display Items

Decide the items to be displayed on the object. You can select ‘Column Header’, ‘Outlines’, ‘Buttons’, ‘Alarm Time’, ‘Device name’, ‘Value’, ‘Alarm Status’, ‘Alarm Description’, ‘Ack Time’, ‘Clear Time’, and ‘Interest Tag’. Refer to the table below for detailed information on ‘Display Items’.

Display Order

Assign the order of the displayed items. Select an item then press the [Up]/[Down] button to move the items. You can also delete the selected item by pressing the [Del] button.

Display Count

You can assign the number of messages to be displayed on the object. You can enter a value from 1 to 500.

Run Specified Action On Double Click

Select this option to execute the command assigned to ‘Execute Command by Alarm Ack.’ by double-clicking the message.

New Item – Alarm Clear

Select this option to add a new message when an alarm is released. When this option is deselected, the Alarm On message will be changed into the Alarm Release message.

Item

Description

Column Header

Shows or hides the header of each column.

Outlines

Shows or hides the border of the object.

Buttons

Shows or hides the buttons at the bottom of the object.

Stop: Stops the updating of the Alarm Summary object You can restart the update by pressing the button again.

Stamp: Adds a message that the user has checked the alarm message.

ACK: Changes the selected alarm to the acknowledged state. If the ‘Run Specified Action On Double Click’ option is selected, the ‘Execute Command by Alarm Ack.’ will be executed.

Delete: Deletes the selected alarm message from the object. However, the alarm state is still maintained.

Delete All: Deletes the all alarm messages from the object. However, the alarm state is still maintained.

Setup: Brings up the simple alarm configuration window. You can configure the alarm group, the ‘Active Warning’, and the ‘Filter’ options.

Config: Brings up the Xpanel Config window.

RTL

RTL (Right-to-left) language means the character writing starts from the right of the text field and continues to the left. Arabic and Hebrew are the most widely used RTL languages. English and numeral character characters do not follow the ‘RTL’ option.

※ This option is supported in XpanelDesigner 2.53 and above versions.

Alarm Time

Shows or hides the header ‘Alarm Time’. You can assign the width of the header (from 3 to 50 pixels) and the text. Press the [Edit] button to apply the changes.

Device Name

Shows or hides the header ‘Device Name’. You can assign the width of the header (from 3 to 50 pixels) and the text. Press the [Edit] button to apply the changes.

Value

Shows or hides the header ‘Value’. You can assign the width of the header (from 3 to 50 pixels) and the text. You can also configure the decimal points of the value (0 to 5 decimal points). Press the [Edit] button to apply the changes.

Alarm Status

Shows or hides the header ‘Alarm Status’. You can assign the width of the header (from 3 to 50 pixels) and the text. Press the [Edit] button to apply the changes.

Alarm Description

Shows or hides the header ‘Alarm Description’. You can assign the width of the header (from 3 to 50 pixels) and the text. Press the [Edit] button to apply the changes.

Ack Time

Shows or hides the header ‘Ack Time’. You can assign the width of the header (from 3 to 50 pixels) and the text. Press the [Edit] button to apply the changes.

Clear Time

You can enable this option by deselecting the ‘New Item – Alarm Clear’ option.

Shows or hides the header ‘Clear Time’. You can assign the width of the header (from 3 to 50 pixels) and the text. Press the [Edit] button to apply the changes.

Interest Tag

Adds the interest tag to the display. Shows or hides the header for the interest tag you selected from the dropdown menu. You can assign the width of the header (from 3 to 50 pixels) and the text. You can also configure the decimal points of the value (0 to 5 decimal points). Press the [Add] button to add the tags. You can add up to 14 interest tags.