...
Run Enet Frame Editor | Run ‘Enet Frame Editor’ from the GLOFA Loader, then configure the I/O options.  PLC Type: GM1 / 2 / 3 (Select the type of PLC which you are using.) IP Address: Input the IP address of the PLC. This must match the value chosen in the Xpanel Designer XpanelDesigner I/O Device configuration. Subnet Mask: Input the correct Subnet Mask. This must match the value chosen in the Xpanel Designer XpanelDesigner I/O Device configuration. Gateway: If the PLC is connected outside of the Xpanel’s local network, you must input the IP address of the gateway here. |
Enet Frame Editor: Write | Once Ethernet configuration is complete, select 'Online – Write' in the GLOFA Loader menu.  Select the proper slot for the Enet module, then click [Write]. |
...