...
Each field can be configured with the following rules:
Station Name | Give a name to the PLC. This name will be used in the database window accompanied with the ‘Device Name’. |
|---|---|
Station Type | Choose the ‘MicroLogix’. (No other type) |
Network ID | No effect. |
Socket Port No. | Default is set as 4481 for MicroLogix. |
16Bit Data Swap | Data is obtained by switching between High and Low Byte in WORD data. |
32Bit Data Swap | Data is obtained by switching between High and Low Byte in double WORD data. |
String Data Swap | Data is obtained by switching between High and Low Byte in the string data. |
Comm. Error Message Pop Up | With this feature ON, the communication error message appears when Xpanel detects “Send/Receive” error. The error message will disappear after 5 seconds. |
Fast Mode | No effect. |
Fixed ATVXEL Socket Port | Enables the ATVXEL Socket Port No. |
ATVXEL Socket Port No. | Choose a Socket Port No. for the Xpanel. |
I/O Device Write Enable | Enable the device to write. |
Data Request Size Limit | Enables the 'WORD' and ‘BIT’ boxes below. Input the maximum word and bit data desired. |
...
Address and Function Codes
Address Format |  |
Supported Symbols |  |
Communication Cable Wiring
...