Type | Format | Description | Security|
Function | GetSecurity() | Returns the current security level. | |
Subroutine | LogOn(“UserID”,”Password”) | Logs on with the user information. | |
Subroutine | LogOnWin() | Brings up the User Log On window. | |
Subroutine | LogOff() | Logs out the current user. |
GetSecurity | Returns the current security level. | |||
Function | n=GetSecurity() | |||
Description | Returns the current security level and stores the value to the variable. | Subroutine | LogOnWin() | Brings up the User Log On window. |
Example | Stores the current security level to the variable “Slevel”. Var Slevel; …… Slevel = GetSecurity(); |
LogOn | Logs on with the user information. |
Subroutine | LogOn(“UserID”,”Password”) |
Description | Logs on with the user ID and password that is registered to ‘Security’. If the wrong information is used, one of the messages shown below will pop up. |
Example | Logs on with the user ID “CIMON”, password “0000”. |
...
LogOff
...
Logs out the current user.
...
Subroutine
...
LogOff();
...
Description
...
Logs out the current user.
...
Example
...
Logs out the current user.
LogOff();
...
GetSecurity
...
Returns the current security level.
...
Function
...
n=GetSecurity()
...
Description
...
Returns the current security level and stores the value to the variable.
...
Example
...
Stores the current security level to the variable “Slevel”.
Var Slevel;
……
Slevel = GetSecurity();
LogOnWin | Brings up the User Log On window. |
Subroutine | LogOnWin() |
Description | Brings up the User Log On window on Xpanel. If there is no registered user in the project, the window will not appear. Select a user from the dropdown menu, or type in the user ID, then enter the password. If you enter a wrong password, the message will pop up as shown below. You can change the password by pressing the ‘Password’ button on the Log On window. Once pressed, a message box will pop up asking if you want to change the password. Press the ‘Yes’ button to go to the ‘Change password’ dialog box. P/W: Enter the old password. New P/W: Enter the new password. Confirm P/W: Enter the new password again. You can apply the new password to the ID by pressing the ‘OK’ button. |
Example | Brings up the User Log On window. |
LogOff | Logs out the current user. |
Subroutine | LogOff(); |
Description | Logs out the current user. |
Example | Logs out the current user. LogOff(); |