...
b) To display the tag value in the Xpanel runtime, select [Draw] – [Dynamic Tag] and click on the page. Configure the object as shown below and press [OK]. The Download the project to the Xpanel device and run it. Because the PLC is not turned on yet, the dynamic tag object will now display the value of the PLC’s D0 addressbe transparent.
...
Checking the Operation
a) In CICON, create the program shown below. The program saves a random number at D0 while M00 is on.
...
b) In the CICON project tree, go to [Parameter] – [PLC Parameter] and double-click it. In the ethernet tab, set the IP address for the PLC. If the PLC and Xpanel are on the same local network, then the subnet mask and gateway should match. When you are finished, press [OK].
...
c) Download the XpanelDesigner program to Xpanel and run it. Download the CICON program to the PLC and run it at the same time. You can edit the value of M00 in CICON while connected to the PLC. When the M00 contact turns ON, you will find that the value stored in D0 changes on the Xpanel screen.
...