Versions Compared

Version Old Version 1 New Version 2
Changes made by

Jessica Reyes (Unlicensed)

Jessica Reyes (Unlicensed)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

For normal communication between Xpanel and PMAC, the some I-variables should have the values described below.

...

Store these values to the non-volatile flash memory with the ‘SAVE’ command. Then turn off power.

 Please refer to PMAC’s manual for more information.

Communication Setup: Xpanel

Create a New Device

For creating a new device, go to [Tools] - [I/O Devices] or click on the (blue star) icon in the toolbar.

The following images shows the first step of creating a new device.

Image Added

I/O Device Name: Give a device name. This name will be used in the Tag configuration window of the database accompanied by the Station Name.

Select a Device Type

After selecting [Ok] in the previous step, the ‘Serial Communication configuration’ dialog box will show up.

Image Added

Select ‘DELTA TAU PMAC Drive’ in the Device Type dropdown menu. Then configure the proper serial communication parameters. (9600bps, no parity, 8 data bits, and 1 stop bit recommended)